Decimates a DAT file to reduce the observation rate
Splits a DAT file collected using Fast Static methods into a file for each of the occupations. Useful converting to Rinex.
Removes WAAS Records from a DAT file. Some versions of DAT file processing software (TGO for example) will not work if the WAAS records (type 25) are in the file.
Removes position records (Type 11) from a DAT file. This can be useful in a few cases with processing software. As it may force it to compute a postion based onthe observables in the file. Not the positions, which might be incorrect
Converts a DAT file into a continuous DAT file. Useful if not using a Survey Controller to collect the data
Converts a DAT file with High Accuracy positions to low Accuracy. Useful wehn survying in a base station which is logged using TRS or other base station software.
Converts a DAT file into one that has lots of 5 second stop and go occupations. Useful for testing
Converts a Continuous kinematic file to static. Useful if you have configured your TRS incorrectly.
Removes Position or Observation records that aren’t on the second
Fix files DATcut over a GPS week rollover
Converts positions form a T01/T02 file intoa ASCII file that can be used by Radio_Mapper or other tools
Tool for checking receiver replies to GETSTAT and GETBASE trimcomm commands
Sends RTK/RTCM control commands, including the network RTK commands. Allows full control over what is sent to the receiver
Allows configuring of output of all GSOF messages
Decodes TrimComm messages (Inc, CMR and GSOF) from a file
Survey Controller or RT_Traffic Log file, to bin format for CMR_Decode
Decoders CMR, GSOF and lots trimcomm commands in real time
Useful for testing modem support in survey controller. Also useful for testing hardware flow control .
Allows connection to a remote TCP/IP server the data can be logged to a file or sent to a serial port. Useful for VRS and CDPD testing
Sends time information over a serial port, though a receiver or over UDP. Useful for testing comms links.
Pretty printer for RT172TXT
Computes the delay (Latency) of CMR or GSOF messags using the PPS output of the receiver.
Puts a receiver Static for a set period of time and monitors positions
allows downloading and sending of App Files without having to use configuration toolbox (Ctoolbox), it supports Google Earth and TCP/IP connections.
Allows testing of some CMR test cases
Displays status information on the RTK processing
Converts a GPS week second into a normal date, also displaies Julian date and hour. Useful for finding which base file to get for a given rover
Post Processed Kinematic controller
Simple system for creating App files for base stations
Checks the checksum of a NMEA file
Adds NMEA checksums to a file without them
Adds a NMEA checksum to the text in the clipboard. Useful for interactive work
VFD Remote Front Panel for the SPSx50
Downloads and deletes a directory tree from a remote server
Sends a file to OPUS without using the web site
Process mails from OPUS
How many OPUS mails need to be processed
Converts OPUS email to CSV or DC file
TGO Importer for OPUS files
Sets up a Sage or Airlink CDPD modem for RTK use
Sets up an Airlink CDMA mode for RTK use
Deletes Duplicate mp3 files from a directory
application that allows direct control of the Trimble radio.
Generates CMR messages that are valid packets, invalid SV data, for radio testing
System for mapping Radio coverage and creating KML files ofthe radio coverage Moving Paths, (RMAP2KML) or Static Observations (RMAP2POS)
Allows use of the emulator with mutiple devices instead of one